undergroundsetr.blogg.se - Switchresx sidecar

SWITCHRESX SIDECAR DRIVERS
SWITCHRESX SIDECAR FULL
SWITCHRESX SIDECAR PRO
SWITCHRESX SIDECAR PASSWORD

Always dump the correct files for your own BIOS version!

SWITCHRESX SIDECAR PASSWORD

You can adjust all UEFI settings even if the BIOS is password protected as long as booting from external media is allowed and/or SecureBoot is disabled to load the.

Needed tools: grub-mod-setup_var on a FAT32 USB-Stick or on the OpenCore EFIĭell_PFS_Extract, UEFITool_NE_A58, Ifrextractor (They are all available for both macOS and Windows).

SATA Mode: AHCI (Default: RAID) (Also includes NVMe drives! macOS will not see any drives when using RAID mode)Īdjust UEFI variables to enable and disable CFG lock.

I made some adjustments to the WEG framebuffer patches to enable two displays via Thunderbolt.īuggy or not updating from time to time when external displays connectedįlashing Apple's Original Thunderbolt Firmware to the Titan Ridge 2C 2018 SPI EEPROM (Not needed, as everything works fine)įlashing a modded UEFI/BIOS because this option is not listed in the Dell Utility and changes via GRUB setup-var are not working because the EFI writable flag is not set (see section Adjust UEFI variables) Not done yet because of missing Thunderbolt Dock Tested with a Dell WD19TB Thunderbolt Dock. Works fine again after replugging any display cable. connecting new display or change resolution) Gone after updating the display configuration (e.g. HDMI display stays online after disconnection. The trackpad is currently configured to work in polling mode because the GPIO Interrupt mode generates very high CPU load This occurred already on the macOS Catalina Beta and was fixed later. Tested with Apple Watch series 3Įncryption itself is working fine but generates a huge boot delay (30-60 seconds) until asking for the FileVault password.

SWITCHRESX SIDECAR PRO

Tested with iPhone 11 Pro Max and iPad Pro 12,9" Just use or valid SMBIOS, S/N, MLB and MAC-Address. Goes to Sleep when no external display connected and wakes up.

SWITCHRESX SIDECAR DRIVERS

Will never work, because of MacBooks with TouchID and T2 chip and proprietary Windows drivers for Dell. Works, including automatic switch to headphone if plugged in. But USB-C to HDMI or (m)DP adapters are working fine.Īll Ports fully working with USB 2.0, 3.0 and 3.1/3.2 speed Hotplugging of USB-C displays or USB-C docks with a display attached to it, is buggy sometimes. Tested with a Dell WD19TB Thunderbolt Dock and an USB-C iPad. Thunderbolt and USB-C devices are working.

The stock Intel AX Wi-Fi 6 card needs to be swapped out to a compatible card. You can use left/right click with touch tap (change in settings).

SWITCHRESX SIDECAR FULL

Working with full gesture support (5 fingers) but the hardware buttons are not working. For the second display, you have to use an additional USB-C display adapter connected to the "Passthrough"/Daisy Chain Thunderbolt port of your dock because macOS does not support MST. If using a Thunderbolt dock for multiple displays, you can only connect one display to the dock connectors. 4 displays (Internal + 3 external, 2 via Thunderbolt and 1 HDMI) simultaneously working fine. ✅ via Thunderbolt/DP and via HDMI tested. Internal eDP display fully working including Backlight control. 2-3W power consumption in idle stage.įully supported including Turbo, QE/CI acceleration, Metal and 2GiB of VRAM but no DRM in Safari Goes down to 800MHz and boosts to 5.1GHz. This repository should contain everything needed to get Big Sur up and running on your Dell Precision 5550 laptop. This is more of a compilation of information and configs from various repositories and forums than a place where real development happens.

A collection of all files needed to run Big Sur on a Dell Precision 5550.